SP-600 SHEET PILE

Reinforced PVC sheet pile, in diameter has the shape of two connected Z – shaped steel sheet piles.
Throughout the length of the edges are tongue-and-groove locks, which allows to connect the individual sheet pile into a solid wall. The SP-600 has a total width of 3 horizontal shelves of 600 mm and a wall thickness of 9 mm. The length of the product is 18 m, and the weight of 1 sq. m is 30 kg, the material is durable PVC. This PVC sheet piling is widely used in PGS. The low cost and the possibility of immersion without the use of technology allow you to use this sheet pile in residential housing.
LLC "PVC West" produces PVC sheet pile SP 600, and also carries out the installation of the sheet pile. The technical characteristics of the product can be found on this page.

Sheet pile cross - section width - mm- 600
Sheet pile cross - section depth - mm- 182
Sheet pile wall thickness - mm - 9.0
Density - kg/m3 - 1500-1600
Tensile strength - 40 MPa
The modulus of elasticity in tension - Psi - 2600
Flexural modulus of elasticity - 2600 MPa
Flexural modulus of elasticity long - term-MPa - 1000-1500
The limit of plasticity in compression - MPa - 55-60
Cross - section resistance moment-cm3/m - 976
Moment of inertia of the cross section - cm4/m - 11022
Maximum permissible torque - kNm/m - 22.42
Weight per square meter of sheet pile - kg/m2 - 26