SP-250 SHEET PILE

Made of durable polyvinyl chloride (PVC). It has a classic Larsen "P" shape across.
The entire length of the sheet pile has a lock. This allows you to connect the sheet piles in a solid water-resistant wall. The SP-250 PVC sheet pile has a shelf width of 250 mm, a wall thickness of 9 mm, and a length of up to 15 m. Weight of 1 sq. m reaches 24 kg. The product is not destroyed by rust and ultraviolet light. It is used in hydraulic engineering and in the private sector.
LLC "PVC West" produces PVC sheet pile SP 250, and also carries out the installation of the sheet pile. The technical characteristics of the product can be found on this page.

Sheet pile cross - section width - mm- 250
Sheet pile cross - section depth - mm- 103
Sheet pile wall thickness - mm - 9.0
Density - kg/m3 - 1500-1600
Tensile strength - 40 MPa
The modulus of elasticity in tension - Psi - 2600
Flexural modulus of elasticity - 2600 MPa
Flexural modulus of elasticity long - term-MPa - 1000-1500
The limit of plasticity in compression - MPa - 55-60
Cross - section resistance moment-cm3/m - 830
Moment of inertia of the cross section - cm4/m - 8565
Maximum permissible torque - kNm/m - 17.22
Weight per square meter of sheet pile - kg/m2 - 26